binary alloy

英 [ˈbaɪnəri ˈælɔɪ] 美 [ˈbaɪnəri ˈælɔɪ]

二元合金

化学



双语例句

  1. Phase-field Simulation of Dendritic Growth of a Binary Alloy Under a Forced Flow
    相场法模拟对流作用下铝合金的枝晶生长
  2. Dissolution behavior of second phases in Al-Cu binary alloy during severe plastic deformation
    强塑性变形中Al-Cu二元合金相的溶解行为
  3. Preparation and Electrochemical Performance of Pt Based Binary Alloy Catalysts
    Pt基二元合金催化剂的制备及电化学性能研究
  4. Limited solid solubility of transition elements in binary alloy phase diagram is studied by ( using) atomic parameters and artificial neural network.
    应用原子参数人工神经网络方法研究了过渡元素二元合金相图中的有限固溶度问题。
  5. A process for gold imitated binary alloy plating was introduced. Factors affecting the color of gold imitation were discussed.
    介绍了一种二元仿金电镀工艺。讨论了影响仿金镀层色泽的各因素。
  6. Numerical Simulation of Three-dimensional Dendritic Growth for a Binary Alloy Using Phase-field Method
    二元合金三维枝晶生长的相场法数值模拟
  7. B2 precipitate and aging hardening in Fe-Cu binary alloy
    Fe-Cu二元合金中的B2析出相及时效硬化
  8. Centrifugal infiltration process of tubular porous preform by a Binary Alloy
    二元合金在管形多孔预制件内的离心渗流过程
  9. Simulation of columnar dendrite grain growth in weld pool of Ni-Cr binary alloy
    Ni-Cr二元合金焊接熔池中柱状枝晶生长模拟
  10. Phase-field simulation of non-isothermal solidification dendrite growth of binary alloy under the force flow
    强迫对流影响二元合金非等温凝固枝晶生长的相场法模拟
  11. Research on Corrosion Behavior of Fe-Si Binary Alloy in Pure Zinc Bath
    铁硅二元合金在液锌中的腐蚀行为研究
  12. Numerical Simulation of Dendritic Growth in Solidification of Binary Alloy with Forced Convection
    强迫对流影响合金凝固过程枝晶生长的数值模拟
  13. Phase-Field Simulation of Isothermal Solidification in Binary Alloy with Forced Convection
    对流下二元合金等温凝固过程的相场模拟
  14. Copper casting type of products: copper ( copper), aluminum bronze, tin bronze, brass, special brass ( brass silicon manganese brass), lead brass ( Brass Rail) and Cu-Zn binary alloy ordinary brass.
    铜产品铸造种类:紫铜(纯铜)、铝青铜、锡青铜、黄铜、特殊黄铜(硅黄铜锰黄铜)、铅黄铜(铁黄铜)及铜锌二元合金的普通黄铜。
  15. Effects of micro content Ti on the structure and properties of Mg-2Nd binary alloy
    微量Ti对Mg-2Nd二元合金的组织和性能的影响
  16. A phase-field approach which incorporates both heat and solute equations for simulation of Al-Cu binary alloy solidification is studied.
    利用耦合温度场与溶质场的相场模型对Al-Cu二元合金非等温凝固时枝晶生长过程进行了模拟。
  17. The dendritic growth and solute profile of the undercooled binary alloy melt were investigated under different undercoolings.
    研究了不同过冷度下二元合金过冷熔体定向凝固时枝晶的演化过程及其溶质场的分布情况。
  18. The existence form of La was quite different from that of Nd in the as cast Mg-Nd ( La) binary alloy.
    在Mg-La和Mg-Nd二元铸态合金中,La和Nd在合金中的分布形式明显不同。
  19. The effects of undercooling on the dendritic growth and solute profile in isothermal solidification of binary alloy were investigated.
    研究过冷度对二元合金等温凝固过程的等轴枝晶生长以及溶质场分布的影响。
  20. The changes in button ingot mass of pure Ti, pure Al, TiAl binary alloy and TiAl-Nb ternary alloy after PAM have been observed with the same vacuum degrees.
    对比研究了在相同的真空度条件下纯Ti、纯Al、TiAl二元合金和TiAl-Nb三元合金PAM过程纽扣锭质量变化。结果表明,纯Al在PAM过程中质量随重熔次数的增加而递减。
  21. The Mo-Ti gradient material was developed on the surface of Ti alloy substrate by electron beam smelting ( EBS) technology based on analyzing the properties of Mo, Ti elements and Mo-Ti binary alloy phase diagram.
    通过对Mo、Ti元素基本性质及Mo-Ti二元合金相图的分析,设计了Mo-Ti复合层,在钛合金基体上制备了Mo-Ti梯度材料。
  22. The low-frequency internal friction in Zn-Al binary alloy during the melting process is measured via forced vibration torsional pendulum.
    利用强迫振动扭摆方法对ZnAl二元合金熔化过程的低频内耗进行了研究。
  23. Effects of Si content and modification on microstructure and properties of in-situ Mg2Si/ Mg composites prepared with Mg-Si binary alloy have been investigated.
    分析了Mg-Si二元合金直接原位形成Mg2Si/Mg复合材料的过程,研究了Si含量以及变质处理对复合材料组织和性能的影响。
  24. The evolution of channel segregation in a binary alloy for various initial species concentrations in the ingot was analyzed using a mathematical model describing the fluid flow and species distributions in the mushy zone in a directionally solidified ingot.
    为了研究二元组分铸锭中通道偏析的形成和发展,建立了双扩散作用下糊状区液相流动与溶质分布的数学模型,并对铸锭定向凝固过程中的通道偏析进行了数值模拟。
  25. Some amorphous binary alloy films have been successfully grown by ion beam assisted deposition ( IBAD).
    本文阐述了用离子束辅助沉积(IBAD)技术制备非晶合金薄膜的基本思路,介绍了本研究组在二元合金系统里制备非晶和亚稳晶相的研究结果。
  26. We can forecast the segregation of binary alloy by the change of surface energy.
    通过表面能的变化可以预测二元合金的表面偏析行为。
  27. A phase-field method for two-dimensional numerical simulation of binary alloy during directional solidification is studied, the evolution of the interface morphology is showed and the effects of phase-field parameters on interface morphology are formulated for Ni-Cu binary alloy.
    采用相场方法对二元合金的定向凝固进行二维数值模拟,以Ni-Cu合金为例,展示了界面形态的演化过程,研究了相场参数对界面形态的影响。
  28. A formula of hydrogen solubility in TiAl alloy melt was obtained based on thermodynamic theory and experimental data. The relationship of hydrogen solubility in TiAl binary alloy melt between composition, partial pressure of hydrogen and melt temperature was established.
    结合热力学理论和实验数据,得到了氢在TiAl二元合金熔体中的溶解度模型,建立了氢在TiAl二元合金熔体中的溶解度与合金成分、氢分压和熔体温度的关系。